You could probably get away with using just one leg, but If you're wanting maximum sturdiness I'd definitely suggest going with at least two Replacement Leg Kit for etrailer RV Dinette Tables # e79RR or # e69RR.
The # e69RR are recessed mounted, and the # e79RR are surface mounted, so if you're dropping these legs into a pre-existing mounting hole the recessed option will be the one you want, if not I'd go with the surface mounted option.
As far as sturdiness goes, these legs do get... view full answer...
The LaSalle Bristol RV LED Ceiling Light # 344410129512744RT that you referenced does have a switch on the side of the base of it. See picture. Most of the time people will wire this to a wall switch but if you wanted to operate it only with the switch on the unit you certainly could. view full answer...
I have attached a video giving you an idea of the Gustafson RV LED Ceiling Light part # 277-000469-499 brightness when turned on. It has a cool or soft white feel which gives off the more traditional type of lighting. This type of lighting is very common in campers. In my experience the 6 diodes in this light are going to give you a brighter light than you will get out of two 921 bulbs. view full answer...
We have a folding table that our customers have mounted to the outside of an enclosed trailer. Check out the Tow-Rax folding table, # TWSP45HFTA. This table is 45-1/2" Long x 18-1/2" Wide and when folded would only add about 3 inches of width to the trailer.
I attached a couple pictures of it mounted to the outside of a trailer as well as a review video for you to check out as well. view full answer...
The correct replacement antenna for the FRC12TA-BL Furrion observation system is the Replacement Antenna for Furrion Vision 1, 2, and S Wireless RV Camera Systems # 772577. view full answer...
Since you have a Kwikee Series 25 RV step the correct motor with table is part # LC379804. You do not need to pick out an additional linkage and gear box to go with this kit. view full answer...
The picture I attached is what the bulb looks like that comes with the # 277-000420. You can see that it's a 1157 type of bulb that requires to to push in slightly and then twist to remove.
For an LED replacement to what you have in warm white we have the part # DG526241VP which will work great. Warm white is a great color for interior lighting that closing resembles the color of incandescent lights. view full answer...
We do have the correct replacement antenna for your Furrion FOD43TA-BL camera system. The correct part is the Replacement Antenna for Furrion Vision 1, 2, and S Wireless RV Camera Systems # 772577. view full answer...
The replacement monitor part # FR97FR that you referenced does not fit your older Furrion Observation system part # FOS48TA-BL that you referenced. What you have is an older design that would require a full replacement like with the part # FOS05TASF. view full answer...
Yes, the Furrion Vision S Wireless RV Backup Camera System part # FOS43TASF could be used inside a horse trailer. If you do indeed have the newer model FOS43TASF as opposed to the older model FOS48TA-BL then you can use the Furrion Vision S Wireless RV Backup Camera part # FCN48TASF. view full answer...
Since your trailer has the bracket # FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part # FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3 inch screen. For a version with a 5 inch screen use # FOS05TASF. view full answer...
Yes, the Furrion Vision S Wireless RV Backup Camera System # FOS43TASF that you referenced will fit well to the bracket and wiring you have on your trailer as it would be a direct fit. view full answer...
Your 2019 Grand Design Reflection 150 would have a Furrion camera kit so for a monitor you have a few option:
- 4.3" Monitor: Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System # FR77FR
- 5" Monitor: Replacement 5" Monitor for Furrion Vision S Wireless RV Camera System # FR97FR
- 7" Monitor: Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System # FR47FR view full answer...
The Furrion monitor you have is a now discontinued line and there aren't any current cameras that would work with it. Only option is an all new setup like with the # FOS05TASF which includes a 5 inch monitor. view full answer...
The Furrion Vision S systems are designed to fit the mount you have on your Wildwood XLite RV like the part # FOS43TASF which comes with a 4.3 inch monitor or the part # FOS05TASF which comes with a 5 inch monitor. view full answer...
The Forest River trailers are prewired for the Furrion camera systems. The parts your referenced are actually their older models they have discontinued. We have 3 size options available with different added options as well. I recommend using the 5 inch or 7 inch screen because it allows you to view multiple cameras simultaneously if you will be using more than one.
Here are all your options to work with the pre-wiring of your trailer:
-Furrion Vision S Wireless RV Backup Camera System... view full answer...
For your trailer I recommend the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen # FOS05TASF or if you also want side cameras # FCE48TASL-05. These are the newer options compatible with your pre-wired system.
You can use the 4.3 inch without side cameras # FOS43TASF if you wish. view full answer...
The only option we currently have that will give you the 24 x 48 inches of space you need as well as the safety, I recommend the GearSpace 34 Enclosed Cargo Carrier for 2" Hitch - Slide Out item # HGK819 (dark grey) or item # HGK826 (light grey). With the GearSpace 34, it has internal dimensions of 63" long x 28" wide x 40" tall. Also, the GearSpace 34 has been constructed to withstand the added torque and force when mounted on a hitch receiver on a flat-towed vehicle. Almost all of our... view full answer...